37
PROGRAMMING MODE
ENGLISH
9. Special Day Dry Time Setup
Special Day Dry Time Setup can be used to set the drying time.
Special Day Dry Time Setup
Display
Enter SVC Mode
Press 1st button
Press 2nd button
Press Start button
Press 2nd button or 3rd button Until display shows
Press Start button
Select the time you want
Button functions :
Start button = Select
1st button = Go back a step
2nd button = Move up or Increase value
3rd button = Move down or Decrease value
Press Start to set the time The next course setting will be displayed.
• Range : 5~99 min
• Increments : 1
• COS1 : High Temp
• COS2 : Med Temp
• COS3 : Low Temp
• COS4 : No Heat
NOTE