General System Additional Settings Advertisement
If your TV is connected to the Internet, webOS may use a frequency capping cookie to
keep track of the number of times an ad is shown on your TV.
This information is used to help limit the number of times the same ad is displayed. You
can clear this cookie or turn it on or off at any time by going to the Advertisement
setting on your TV.
No personally identifiable information is tied to this cookie.
Some models may not be supported.
Using the Live Plus
Live Plus is a service that provides a variety of information about the programs you
watch.
To see the details, click the Making the Most of Smart TV Live Plus in User Guide.
Some models may not be supported.
Set ID
General System Additional Settings Set ID
You can set a number (ID) to manage multiple TVs.
This feature is for administrators. It is not recommended for use in a typical home
environment.
Restoring the Default Settings
General System Reset to Initial Settings
Return TV to its initial settings. This will return all settings to their default values.
After reset, the TV will automatically turn off and on.
If Safety is set to On; you should type the password to Reset to Initial Settings.
Do not turn off the power during initialization.
We recommend that you reset the TV to Reset to Initial Settings before you sell it or
transfer it to a third party.
Accessibility
To Next Page
Loading...
Need help?
General