Using the Magic Remote
If the pointer is not responding smoothly, you can reset the pointer by moving it to the edge
of the screen.
Use the remote control within the specified range (within 10 meters or 33 feet). The device
may not function properly when outside the working distance or when an obstacle blocks
the line of sight.
Depending on the peripherals (wireless router, microwave oven, etc.), communication
failures may occur.
Impacts can cause the Magic Remote to malfunction.
Take care not to bump into nearby furniture, electronic equipment, or other people when
using the Magic Remote.
For details on configuring the pointer of the Magic Remote, see User Guide Settings
System Pointer Options.
Using TV features with Hands-free Voice
Control
Using TV features with Hands-free Voice Control
This function is only available when the TV is connected to the Internet.
If Hands-free Voice Control does not work, set Use Hands-free Voice Control to On in
General AI Service Voice Recognition Settings.
If you shake the Magic Remote left and right or turn its wheel while pointing it at the
TV, a pointer will appear on the TV screen.
If you move the remote control in the direction you want, the pointer follows the
movement.
01
Move the pointer to the location you want and press the Wheel (OK) button to
execute the function.
02
If the pointer has not been used for a certain period of time, it will disappear. When
the pointer disappears from the screen, shake the Magic Remote right and left. It will
then re-appear.
The pointer will disappear if you press the up, down, left, or right buttons, and the
remote will work as a conventional remote.
03
Say “Hi LG” within the watching distance from your TV.01
To Next Page
Loading...
Need help?
General