Dolby TrueHD , HDMI eARC , Dolby Atmos : Some models may not be supported.
When connected with HDMI eARC, the output audio type will depend on the audio type
supported by the connected device.
Using eARC Supported Audio Device
Sound Advanced Settings eARC Support
eARC is a technology that can send and receive more sound information faster thanks
to its wider bandwidth than that of the conventional ARC. You can enjoy TV sound with
higher quality than ARC through a connected audio device.
Initializing Sound Settings
Sound Advanced Settings Reset
Restores the detailed effect settings for the Standard sound mode to the initial settings.
This setting only applies to the internal speakers of the TV or HDMI (ARC) connected
devices that support TV Sound Mode Share.
AI Service
AI Picture / AI Picture Pro
General AI Service AI Picture / AI Picture Pro
When set to On, the image quality is automatically optimized for content characteristics
based on the algorithms learned with deep learning techniques.
It is supported for only digital broadcasting, videos of a USB memory device, and HDMI
video input.
Depending on the device connected and input audio type, it can be output as Dolby
Metadata-Enhanced Audio Transmission PCM (Dolby MAT PCM).
●
If Digital Sound Output is set to Pass Through and HDMI input is Dolby TrueHD or
Multi-Channel PCM, audio can be output as Bypass.
●
Connect an audio device that supports eARC to the HDMI (ARC) port.01
Go to Sound Out Use Wired Speaker and choose HDMI(ARC) Device.02
Set eARC Support to On.03
To Next Page
Loading...
Need help?
General