10.2 Handset
The handset is included as a standard feature. The handset is available with and without button illumination. The
button illumination of the illuminated handset is active when the bed is connected to the mains. The functions of
both handsets are identical. Where the handset is to be stored on the bed depends on the patient’s condition.
1. Thighrest Adjustment Button
2. Thighrest/Backrest Lock LED
3. Backrest Adjustment Button
4. Activating GO Button
5. Auto-Contour Button
6. Height Adjustment Button
7. Height Lock LED
8. Flashlight Button
9. Flashlight
To switch on the flashlight:
Press and hold flashlight button 8 and flashlight 9 on the top of the handset will light up.
Set the positions as follows:
Activate the keypad by pressing the GO button.
Press and hold the function button until the desired position is reached.
NOTE: Depending on the patient’s condition, the nursing staff decides whether the patient is allowed to adjust the
bed’s position.
If required, prevent the patient from adjusting the bed as follows:
Disable functions.
Unplug handset.
NOTE: The handset can be plugged into another LINET
®
hospital bed with the Plug and Play slot.
To Next Page
Loading...
Need help?
General
