14 Maintenance
14.1 Maintenance Work
The connector replacement should only be carried out by service personnel trained by LINET
®
. For
service related instructions, please refer to the service documentation.
Ensure the following maintenance work is performed every 12 months by the manufacturer or by a
qualified service organisation trained and certified by the manufacturer. Service documentation and
electrical schemes are available for qualified service organisation trained by Linet.
The manufacturer will provide the service organisation with service training certification to confirm the
organisation is qualified to carry out maintenance on LINET
®
products.
Do not use the bed If any malfunction or defect occurs. In this case contact the manufacturer or service
organisation immediately.
14.1.1 Spare Parts
The product label is located on the longitudinal rail of the mattress platform frame. The product label contains
information required for product queries and ordering replacement parts.
Information about spare parts is available from:
Seller´s customer service
Sales
Our technical support department
14.1.2 Completeness
Perform a visual check (with delivery note if necessary).
Have any missing parts replaced.
Ensure that the adjustment function on the nurse control panel is locked prior to assembly, disassembly,
cleaning and maintenance