1. Loosen the drain plug and drain the fuel inside
of the filter.
2. Disconnect electric wire of the fuel filter sensor.
3. Remove the element from the body
4. Remove the fuel filter sensor from the element
and assemble it to the new element.
5. Attach the element to the body.
6. Connect electric wire of the fuel filter sensor.
7. Tighten the drain plug and bleed the air.
(See page 5-25)
Drain plug
Body
Element
O-ring
Fuel filter sensor
(3) Replacing Fuel filter cartridge
▶
Do not fill the new filter with fuel. The invisible fine foreign materials enter the
injection pump and it may cause damage to the fuel injection system.
Caution
Cover
Primary
element
Evacuator
valve
Safety filter
element
(4) Replacing Air cleaner element
(Dry type)
Remove the cover and pull the primary element
straight out, ensuring the inner element remains
in place.
Clean the inside of the air cleaner housing using
a clean damp cloth, taking care not to damage
the safety element.
Check if there is damage inside filter element by
using a light. If finding tiny crack or small holes
change it with a new one.
Insert the filter element by pushing it deeply into the filter housing.
Remove the dust of the evacuator valve and clean the inside of the cover.
Assemble the cover with the evacuator valve placed downward.
▶
Do not start the engine or close the hood if the filter element is not assembled..
Notice
To Next Page
Loading...
Need help?
General
