(14) Work light switch
There is a switch to turn on the rear work light.
ON – place the switch to the right direction and
the work light shall be ON.
OFF – place the switch to the left direction and
the work light shall be OFF.
▶
When driving on the road at night, do not let the rear work light stay “ON”. It may
cause a disturbance to the driver of the following car.
Caution
ON
OFF
(15) Cruise control indicator
(HST type)
It shall be ON when the cruise control drive is
working.
(16) Cruise control switch
(HST type)
The cruise control switch is for HST type tractor.
Position “A” : Release the cruise drive.
Position “B” : Neutral.
Position “C” : Apply the cruise drive.
Cruise control switch
Cruise control
indicator
3
3 3
3 - 5
For cruise drive, press the upper side (“C”
position) of the cruise control switch in the state
of pressing the forward pedal. And then, the
forward pedal shall be fixed and the switch will
return to the neutral (“B” position).
To stop the cruise drive, press the both brake pedals or lower side (“A” position) of the cruise control
switch. The forward pedal returns to the neutral position and the cruise drive shall be disengaged.
▶
DO NOT press the one-side brake during cruise driving. You have to connect the
left and right brake to avoid the possible accident before driving.
▶
Do not apply the cruise control switch in the state of pressing the reverse pedal.
Caution
To Next Page
Loading...
Need help?
General
