(2) Changing speed
Depress the clutch pedal fully and operate all the
shift lever correctly.
For more information, refer to “Operating Levers
and Pedals” in the Section 3-2. (See page 3-7)
Clutch pedal
Mechanical type
HST type
Just pressing the HST forward / reverse pedal
respectively makes it possible to travel forward
and in reverse. Moving (forward / reverse),
neutral and changing speed can be controlled by
the pedal.
The range gear shift lever must be operated in
the neutral state of the pedal, and after tractor
has stopped completely.
Set driving speed properly depending on the road
condition.
HST forward
pedal
Throttle lever
HST reverse
pedal
4
4 4
4 - 6
To Next Page
Loading...
Need help?
General
