(17) PTO operation indicator
When the key switch is “ON” and PTO switch is
“ON”, this indicator will be ON.
PTO
operation
indicator
PTO switch
ON : PUSH AND TURN
OFF : PUSH
(17) PTO switch
After starting the engine, you must comply with the operation procedure of the PTO switch as follows.
1. Place the PTO gear lever (if fitted) to desired position.
(For further information, See page 3-11)
2. Turn the PTO switch to “ON” position to operate the PTO.
3. When the PTO is working, PTO operation indicator on the instrument panel shall be “ON”.
4. If you want to stop the PTO temporarily while operating, push the PTO switch to “OFF” position.
The PTO operation shall be OFF.
5. Before shifting the PTO gear lever (if fitted), always ensure to place PTO switch in “OFF” position.
▶
Before attaching or checking the PTO driven equipment,
- Always place the PTO switch in “OFF” position, and PTO gear lever in “NEUTRAL”
position.
▶
If the PTO switch is placed in “ON” position, PTO rotates even if the tractor moves
backward. Pay attention to the surroundings to prevent a accident.
Warning
3
3 3
3 - 6
(19) Parking brake indicator
This indicator will be ‘ON’ when applying the
parking brake. (See page 3-10)
Parking brake
indicator
▶
Do not engage the PTO with the engine running at high speed. Sudden
engagement can cause damage to some implement and tractor.
Engage PTO at low RPM, and then raise engine speed to rated RPM.
To Next Page
Loading...
Need help?
General
