Service, maintenance and technical support
62 Snow depth sensor SHM 31, V2.1
If the glass pane of the transmitter / receiver is dirty, clean it with a damp, wrung-out cloth. Then
dry the panes with a dry, lint-free cotton cloth.
Also remove dust and dirt from the housing.
Do not use solvents such as cleaning solvent, thinner, alcohol, kitchen cleaners, etc., to clean the
sensor, as these products can damage the housing and the optical parts.
If you use a chemical cleaning cloth, be sure to follow the accompanying instructions.
To Next Page
Loading...
Need help?
General
