7.10.2 Adjust the volume of the video
In PLAYBACK mode, Press [] or [] to adjust the volume of
the video.
7.11 I would like to capture images
7.11.1 Capturing and saving images
1. Press [CAPTURE] on the remote control or control panel to
capture and save images.
You cannot capture images when the capture mode is set to
[Disable]. If it is set to [Continuous], you can capture images
continuously. Press [CAPTURE] to start capturing
continuously, or press [CAPTURE] again to exit.
To change the quality of captured images, please refer to
7.11.2 Setting the quality of captured images.
To change the settings of captured images, please refer to
7.11.3 Setting continuous capture.
7.11.2 Setting the quality of captured images
1. Press [MENU] on the remote control or control panel to enter the
setting menu.
2. Press [] or [] to the [Storage] menu.
3. Press [] to find [Image Quality].
4. Press [] or [] to select among [High/Medium/Low].
5. Press [MENU] to exit.
7.11.3 Setting continuous capture
1. Press [MENU] on the remote control or control panel to enter the
setting menu.
2. Press [] or [] to the [Setting] menu.
3. Press [] to find [Capture Action].
4. Press [] or [] to select [continuous].
5. Press [] to the [Capture Mode].
6. Press [] or [] to select [Photo].
7. Press [] to find [Capture Time]; Press [] or [] to select capture
time.
8. Press [] to find [Capture Interval]; Press [] or [] to select
interval time.
9. Press [MENU] to exit.
To Next Page
Loading...
Need help?
General
