Commissioning and operation
26
1. Engine room panel (integrated LC display “IGN ON/OFF"-button,
Start"-button, “Set+ Set-"-button and emergency stop switch)
The engine room panel is optionally available and serves to display engine and gearbox data, as well as
system information. In order to obtain the full functionality of an engine room panel, as well as the display
additional function buttons are integrated for the control of the ignition. starting the engine and for engine
speed adjustment.
5
4
3
2
1
(1) Set +
(2) Set -
(3) Emergency stop
(4) Start
(5) ING (Ignition)
Function “Ignition ON/OFF" (5) (yellow button)
After activated ignition at the control console, the ignition in the engine room is switched on and off with the
yellow buttons “IGN ON/OFF" (5).
If the ignition is not activated at the bridge or flybridge, the button has no function.
Activation of the ignition is indicated by the internal yellow lighting of the button. Only when the ignition has
been activated at the bridge is the yellow button “IGN ON/OFF" (5) of the engine room panel enabled.
Caution:
Ignition off ⇒ engine stop
To Next Page
Loading...
Need help?
General
