Commissioning and operation
90
Trolling push-button:
The button can only be pressed in neutral position of the command master levers. The function is ac
tivated by pressing the
button and is indicated by the Trolling LED lighting up.
Pressing the
button again (the command master levers must also be in neutral position) switches off
the trolling function..
Synchronising:
The command can also be adopted by the mobile navigating console when the active navigating console is
in the synchronisation mode.
Here, the synchronisation mode is retained at the mobile navigating console and the LED on the Trolling
button flashes. A neutral position of one of the two command master levers switches off the synchronisa
tion.
The synchronisation cannot be switched on at the mobile navigating console; it can only be taken over from
the active navigating console.
To Next Page
Loading...
Need help?
General
