Commissioning and operation
43
Menu functions
The display unit provides a number of setting options. Activation of the button (1) for approx.
3 seconds activates the menu page. The page contains the following configuration points:
DSelection of the presentation in German, English, Italian, Spanish and French
D Setting the time
D Selection of the logo
D Selection of the display in metric/non-metric units
D Activation of display start status
D Activation of the service page
The menu point in the respective blue marked field can be changed with the buttons (2) and
(3). Pressing the button (5) switches the marking to the next field. Pressing the button
(1) again for approx. 3 seconds causes the set values to be accepted and the menu is exited.
The display switches to the alarm table.
Figure: Menu for setting the display
To Next Page
Loading...
Need help?
General
