Commissioning and operation
85
Switch SLIP & GRIP on and off
Prerequisite: The vessel must be equipped with a trolling transmission.
The transmission function “SLIP & GRIP“ is a combination of trolling in the lower lever range and normal
operation in the upper lever range. This enables a more precise control of vessel speed at slower speeds.
However, maximum speed can be selected at any time.
Danger:
On switching off the “SLIP & GRIP“ the vessel can undergo moderate accelerations.
Switch on Slip & Grip
1. Set the lever on the active control console in the “Neutral" detent.
2. Press button.
The LEDs light.
Switch off Slip & Grip
The “SLIP & GRIP" transmission function can be switched off at any lever position.
1. Press button.
The LEDs go out.
Adjust display brightness
Switch over between day and night mode
Hold button pressed and press briefly.
A repeated brief press of the button always switches between the day and night mode.
To Next Page
Loading...
Need help?
General
