Commissioning and operation
27
Function “Start" (4) (green button)
With the ignition switched on, the engine can be started by pressing the green button “Start" (4).
The button lights up green when the ignition is switched on.
Function “Stop" (5) (yellow button)
Actuation of the yellow button “IGN ON/OFF" (5) stops the engine.
Function “Emergency stop“ (3)
Pressing the emergency stop switch (3) in the cover of the terminal box shuts the engine down immedi
ately. To unlock the emergency stop switch (3), turn the cap of the switch clockwise.
Then the ignition must be switched off and on again, in order to restart the engine.
Engine speed adjustment:
Function “Set +" (1)
By actuating the button “Set +" (1) with the engine running, the engine speed is increased.
Function “Set -" (2)
By actuating the button “Set -" (2) with the engine running, the engine speed is reduced.
Activation of the intermediate speed function:
Press “Set +" and “Set -" simultaneously, until both buttons flash.
To confirm, press both buttons again. Both buttons now light continuously.
Deactivation of the intermediate speed function:
By actuating the yellow button “IGN ON/OFF" (5) the intermediate engine speed function is terminated.
The intermediate engine speed function is carried out in similar fashion on the emergency unit, see
page 92.
To Next Page
Loading...
Need help?
General
