Commissioning and operation
39
Standard function: A reset signal is sent via the CAN bus to the engine monitoring and diagnostic
system control unit (engine terminal box) or to a data station. As long as the appropriate criteria
are fulfilled, the engine slow down or shutdown alarms arising are reset.
Additional function in the menu: Accept change and pass to the next parameter.
Function (Actuation for approx. 3 seconds): Switch-on and switch-off of the display (display only,
not on remote operation).
Additional display function (Brief actuation): Insertion of the info. display for approx. 5 seconds
To Next Page
Loading...
Need help?
General
