Commissioning and operation
53
Menu functions
The display unit provides a number of setting options. Activation of the button (1) for approx.
3 seconds activates the menu page. The page contains the following configuration points:
D Setting the time
D Selection of the presentation in German, English, Italian, Spanish and French
D Selection of the display in metric/non-metric units
D Activation of the service page
The menu point in the respective red marked field can be changed with the buttons (2) and
(3). Pressing the button (5) switches the marking to the next field. Pressing the button
(1) for approx. 3 seconds results in the set values being accepted and the menu is closed.
The display switches to the alarm table. The selection of the language has no influence on the menu and
the service page. These pages are always displayed in English.
Figure: Menu for setting the display
To Next Page
Loading...
Need help?
General
