Maintenance and care
99
Lubrication system
Ensure utmost cleanliness when handling fuels, lubricants and coolants.
Caution:
Use only approved fuels, lubricants etc. (see brochure Fuels, lubricants etc."). Otherwise the liab
ility for defects will become null and void!
Refilling with oil
Danger:
The oil is hot-risk of scalding. Do not
touch the oil drain plug with bare fingers.
Oil is an environmental hazard.
Handle it with care!
With the engine at operating temperature, remove
the oil drain plug on the oil sump and the oil filter
bowl and allow the old oil to drain off completely.
Use a vessel of sufficient size to ensure that the oil
does not overflow.
Note:
Change the oil filter elements every time
the engine oil is changed.
Loosen oil filter cover (1) and unscrew it from the
oil module by 2-3 thread turns. The engine oil now
runs from the oil module into the oil pan.
Caution:
Allow the engine oil to run out without
residue, or otherwise engine oil can flow
from the unfiltered area into the filtered
area.
1
To Next Page
Loading...
Need help?
General
