Commissioning and operation
77
“Gearbox forwards / reverse" (lock) position (2)
In this lever position, two different functions are possible.
1. Standard function:
The gearbox clutch is engaged to Forwards" or Reverse"; the power unit is idling.
2. “Increase engine speed" function
The Increase engine speed" function is set. The engine speed of the power unit is raised prior to enga
ging the clutch and after disengaging the clutch it is lowered again to idling speed. Between the clutch
engaging operations, individual delays (waiting periods BEFORE and AFTER clutch engaging) can be
set.
“Maximum engine speed" position (3)
Position (3) shows the maximum engine speed" for the “Forward and Reverse Range". Between positions
(2) and (3) the engine speed can be set variably. The gearbox clutch is engaged to “Forward" or “Reverse".
Control panel - Control head for twin engine installations
6
7
8
9
10
11
1
4
5
2
3
(1) Button COM
(2) Button SYN
(3) Button TRL
(4) Button S&G
(5) Brightness sensor
(6) LED COMMAND
(7) LED WARM UP
(8) LED SYNCHRO
(9) LED TROLLING
(10) LED SLIP & GRIP
(11) LED ALARM
To Next Page
Loading...
Need help?
General
