Commissioning and operation
60
Function: opens a page which shows visual representations of the engines with the
corresponding measured values (see page 69, Visual engine display).
Function: opens the alarm screen. Here, the acknowledged and unacknowledged
alarms are displayed in tabular form (see page 73, Tabular display of alarms).
Function: opens the measuring point lists. Here, all measuring points are shown in
tabular form (see page 70, Measuring point list).
Function: opens the settings page. Here, the clock, the unit system and other options
can be set.
Function (only available in the measuring point list, alarm table or settings page): swit
ches over to the last visualisation mode shown.
Function (only available on settings page): selects the next adjustable element.
Function (only available on settings page): selects the previous adjustable element.
Function (only available on settings page): increases value of the selected element.
Function (only available on settings page): decreases value of the selected element.
Function: (only available in the alarm table): scrolls up in the alarm table.
Function: (only available in the alarm table): scrolls down in the alarm table.
Function: (only available in the measuring point list): opens the measuring point list for
the port engine.
Function: (only available in the measuring point list): opens the measuring point list for
the starboard engine.
Function: (only available in the measuring point list): scrolls up in the measuring point
list.
Function: (only available in the measuring point list): scrolls down in the measuring
point list.
To Next Page
Loading...
Need help?
General
