Maintenance work on the carrier
7.3 Engine
25.11.2016
Maintenance manual 3 302 364 en 7 - 13
GMK 4100L-1
7.3 Engine
• In addition, carry out further maintenance work specified in the
Engine manufacturer’s documentation supplied.
7.3.1 Checking the oil level
Prerequisites – The truck crane must be level.
Checking the
oil level
• Start the engine from the driver's cab; à Operating Instructions.
• Start the engine and watch the symbol (1).
• Stop the engine immediately if the symbol does not disappear
after 10 seconds.
If symbol (1) is displayed, the oil pressure is too low.
• Allow the engine to run at idling speed for 2 – 3 minutes.
• Switch the engine off.
• Check the oil level after about 2 minutes.
s
S
Risk of damage to the engine if the oil pressure is too low.
Switch the engine off immediately if the symbol (1) is displayed.
Running the engine when the oil pressure is too low can damage it.