Maintenance work on the carrier
7.20 Other maintenance work
7 - 144 3 302 364 en Maintenance manual
GMK 4100L-1
25.11.2016
Spraying
• Spray the corrosion protection agent on
the underside of the carrier using a spray
extension.
• Clean surfaces sprayed by accident
immediately with water.
• Let the corrosion protection dry for one
hour.
• Check that a transparent waxy protective
film has covered the entire surface.
G
Risk of injury to the eyes.
While working with the spray extension you could be hit by the spray jet or
spray droplets. Wear protective goggles, protective clothing and gloves.