12.1 Safe working when replacing appliance parts
For your safety when replacing appliance parts
Before starting service / repair work, it is essential that you familiarize yourself with the rules and hazard
warnings specified and follow the instructions given there.
Eligibility of personnel for removal / fitting of appliance parts
Only qualified personnel from an authorized service company are permitted to remove and fit compo-
nents of the microwave combination oven.
Rules for setting up the appliance safely
To prevent hazards that arise from the installation site and environment of the appliances, the rules for
setting up the appliance safely must always be observed; see 'Requirements relating to the operating
environment of the microwave combination oven' on page 23 in the Installation and Operating Manual.
GROUNDING INSTRUCTIONS
IMPROPER USE OF THE GROUNDING PLUG CAN RESULT IN A
RISK OF ELECTRIC SHOCK.
For all cord-connected appliances:
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of
electric shock by providing an escape wire for the electric current. This appliance is equipped with a cord
having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly
installed and grounded.
Consult a qualified electrician or service technician if the grounding instructions are not completely
understood, or if doubt exists as to whether the appliance is properly grounded.
Do not use an extension cord. If the power supply cord is too short, have a qualified electrician or service
technician install an outlet near the appliance.
To Next Page
Loading...
Need help?
General