eikon e2s Service and Repair Manual UL 37
3.11 Hazards and safety precautions during servicing and repair
Safety hazard: heat
Danger
Where or in what situations does the
hazard arise?
A risk of burns from hot
surfaces
Inside the entire cavity, including all parts
that
are or were inside during cooking,
Containers, baking sheets, shelf grills
etc.
On the inside of the appliance door
Before starting cleaning tasks, wait
until the cavity has cooled to below
50°C / 122°F or use the 'cool down'
function to cool the cavity
Wear specified protective clothing, in
particular protective gloves
Safety hazard: electrical power
Danger
Where or in what situations does the
hazard arise?
Risk of electric shock from
Work on the electrical system must only
be performed by qualified electricians
from an authorized customer service
company
Before removing the covers:
Switch off all connections to the power
supply
Take protective measures at every
power switch to ensure that the power
cannot be switched on again.
Wait 15 minutes to allow the DC bus
capacitors to discharge
Make sure that the appliance is
de-energized
Make sure that the electrical connections
are intact and fixed securely before
plugging
the appliance back into the
Safety hazard: mechanical parts of the appliance
Danger
Where or in what situations does the
hazard arise?
Risk of cuts from sharp
edges
Exercise caution when performing this
action
Wear personal protective equipment
Risk of body parts being
crushed if the appliance
tips over or falls off
When the appliance is being moved e.g.
to gain better access to the connections