Manitowoc Merrychef eikon e2s User Manual

12 Replacing components
eikon e2s Service and Repair Manual UL 142
Item
Name
Function
27
28
Cavity thermostat (cavity overheat stat)
The thermostat continuously measures the temper-
ature in the cavity and prevents it from overheating.
29
Cavity temperature sensor wire (thermocouple)
entering the cavity
The sensor wire extends between the thermostat
and the interior of the cavity.
30
Protective earth
Some components are earthed at the metal base
plate of the oven.
31
Electromagnetic Compatibility (EMC) Filter (2000W
e2s variant: 2x)
EMC filters reduce the transfer of electromagnetic
noise between the drive (convection fan motor and
motor speed controller) and the mains power supply.
32
Fuses
The fuses protect the oven from high voltag-
es/currents.
33
Gland power supply cable
34
Equipotential bonding connection (CE appliances
only)
This is an electrical connection that ensures that the
frames of electrical equipment and any external
conductive components are at an equal (or practi-
cally equal) potential.
Tools required
 M5.5 hex socket wrench / nut runner
 M7 hex socket wrench / nut runner
 M7 hex socket wrench / ring spanner
 M8 hex socket wrench / nut runner
 Stanley knife (for cutting tape)
 Long handled Pozidriv screwdriver PZ1
 Long handled Pozidriv screwdriver PZ2
 Flat screwdriver or lever
 Pliers (or M14 ring spanner)
 Two metal pins (length: 10 mm / 0.4 in)
 Hammer (for removing pressed screws from a spare magnetron)

Manitowoc Merrychef eikon e2s Specifications

General

Brand	Manitowoc
Model	Merrychef eikon e2s
Category	Microwave Oven
Language	English