OPERATING CONTROLS AND PROCEDURES MLC165-1 OPERATOR MANUAL
3-32
Published 08-06-19, Control # 237-09_v1
MAIN DISPLAY INFORMATION SCREEN
Table 3-12. Main Display Information Screen
Item Name Description
1 Main Display
The Main Display is mounted in the front control console. It displays operating
conditions, faults, and diagnostic information. See the MLC165-1 Main Display
Operation Manual for instructions.
2 Information Screen
The Information Screen shows all of the general crane information that can be
viewed during operation. The information screen contains three data boxes that
may be individually tailored by the operator to show the desired information.
See the MLC165-1 Main Display Operation Manual for instructions on selecting
and scrolling through the screens.
3 Crane Information Data Boxes
Displays crane operating conditions. See the MLC165-1 Main Display
Operation Manual for a complete list of operating conditions and for instructions
on scrolling through the screens.
4 Engine Operating Conditions
Displays temperature, pressure, and other operating conditions for both the Tier
3 and Tier 4 engine. See the MLC165-1 Main Display Operation Manual for a
complete list of operating conditions and specifications.
5
Tier 3 Engine Warning Lights
and Fault Codes
See Engine Warning Lights and Fault Codes on page 3-33
.
6 System Fault Alert Symbol
Appears in the upper right corner of the information screen, in the
upper left corner of the system faults data box (7), and an alarm turns
on to alert the operator. See the MLC165-1 Main Display Operation
Manual for a complete list of system faults and operating limits. Take corrective
action when this alert is activated.
To Next Page
Loading...
Need help?
General
