2017 OWNERS MANUAL / 242
Troubleshooting
• If the joystick is unresponsive, check that the bow thruster
battery switch is ON. If it is on, check the circuit breaker box to be
certain that it has not tripped.
• If the pump runs when moving the joystick, but no action results,
check that the inlet and outlet valves are open.
• If the joystick, pump and valves are all operational but there is
still no action, check to be certain there is no debris in the inlet
screen.
• If the bow thruster still is not operating properly, take the boat to
an authorized MasterCraft dealer because other potential solu-
tions are in areas of the boat not accessible to the consumer.
ZINC ANODE
Models
All except ProStar, as part of the Salt Water Package option.
Purpose
If the boat is operated in salt, polluted or brackish waters, even tem-
porarily, the boat should be equipped with a transom-mounted zinc
anode to prevent damage to those metal parts coming in contact
with the water.
The zinc is, by design, self-sacrificing. It is slowly eroded away by
electrolytic action and requires periodic inspection for deterioration.
When the zinc has eroded to approximately one-half (1/2) of its
original size, it must be replaced to continue protection, or damage
to other metal parts may result.
Location
The anode is mounted on the transom.
Operation
There is no operation required. Boat owners should periodically
examine the anode to determine how much erosion has occurred
and consult an authorized MasterCraft dealer to determine the
appropriate time to replace it.
To Next Page
Loading...
Need help?
General
