2017 OWNERS MANUAL / 96
New User Profile Display Instructions
The new rider’s name is listed
above the Activate Touch
Command. Touch [Activate] to
activate the rider settings.
The GEN2 Surf System screen
will appear with the new profile
activated. From this screen,
you can turn On/O Cruise;
set the preferred speed for the
profile; deactivate the current
profile; turn on/o the Auto
Launch/Exit; save the settings
to the current profile; and save
the settings to a new profile.
Delete Current Profile
A rider profile can be deleted using the HV700 Touch. To delete a
new profile, press the Profile Quick Access Key.
Delete Current Profile Display Instructions
Slide finger across the slide bar
to position the rider’s profile
name in the highlighted posi-
tion. Touch [Delete] to delete
the current profile.
A confirmation overlay is
displayed. Touch [Cancel] to
abort the process and [Yes] to
confirm delete.
Profile has been deleted will
appear. Touch [OK] to return to
the Profiles screen. The rider
will no longer be listed in the
slide bar.
New User Profile
A new rider profile can be set-up using the HV700 Touch. To create
a new profile, press the Profile Quick Access Key.
New User Profile Display Instructions
Touch [Add New] to create a
new profile.
Type a name for the new profile
using the touch keypad, and
touch [Done].
Touch [Next] to continue.
New User Profile Display Instructions
Touch the [Up] or the [Down]
arrow to Set the speed for
this profile. Touch [Next] to
continue.
Set the tabs by either sliding
your finger on the ridged area
or by touching the [Up] and
[Down] arrows. Touch [Next] to
continue.
Set the ballast tanks by touch-
ing and sliding your finger up
the tank area or by touching
the [Up] and [Down] arrows
alongside the tank area. Touch
[Next] to continue.
On the Save screen, review the
Profile settings. Touch [Save]
to save the profile and return
to the Profiles screen with the
new profile displayed
(continued on next page)
To Next Page
Loading...
Need help?
General
