2017 OWNERS MANUAL / 98
SETTINGS MENU
Access the Settings Menu screen by pressing the Menu
Quick Access Key on the HV700. The following settings are avail-
able:
Settings Menu
Touch Commands
Description
User Settings — allows you to customize
the display options for ambient light and
brightness, set US or metric units, Tab,
Ballast and other settings.
Service Information — provides informa-
tion about the software version, dealer, oil
changes and dealer services.
Fuel Settings — displays a method to enter
the fuel gallons added and determine the
added value.
Factory Settings — displays boat model,
center tab, surf tabs and depth transducer.
A dealer code is required to access.
Engine Diagnostics — displays Engine Di-
agnostics including a list of fault codes and
descriptions, stored faults and corrective
actions. On some screens, corrective action
will be shown.
PDM Diagnostics — displays the Power
Distribution Module Diagnostics screen.
GPS Settings — displays the facilities to
manage Waypoints, Tracks, Charts & Times
and Depth & Positions. Satellite status will
also be shown for detectable satellites.
Edit Current User
A rider profile can be edited using the HV700 Touch. To edit a new
profile, press the Profile Quick Access Key.
Delete Current Profile Display Instructions
Slide finger across the slide bar
to position the rider’s profile
name in the highlighted posi-
tion. Touch [Delete] to delete
the current profile.
Touch [Edit] to retype the
name. Touch [Next] to contin-
ue or [Cancel] to return to the
Profiles screen.
Follow the same steps as creating a new profile.
Touch [Next] to continue to the next screen without change. Re-
member to click [Save] on the final screen to save the changes.
Cruise
Pressing the Cruise Quick Access Key displays the above screen.
The button displays these four preset Rider profiles:
• Surf L (Left) Mellow
• Surf L (Left) Steep
• Surf R (Right) Mellow
• Surf R (Right) Steep
If the preset settings need adjusting, touch the
button and make the appropriate changes. Pressing Save to
Current will change the existing profile. Pressing Save As New will
provide a keyboard to name the new profile. Ensure the new profile
is Activated prior to the beginning of the surfer’s ride.
To turn On/O Cruise, touch the button.
The button automatically deploys or retracts the
center tab to aid in getting the boat on or o plane.
To Next Page
Loading...
Need help?
General
