Matrix SPARSH VP210 User Guide 11
CHAPTER 3
Getting Started with
SPARSH VP210
Package Contents
• SPARSH VP210 phone
• Handset with handset cord
• Ethernet cable
• Stand
When you unpack the SPARSH VP210 box, please verify whether the above items are present in the package.
Check the contents for damage. In case any of the above listed items is missing, damaged, or faulty, contact the
dealer/reseller. Do not discard any of the package contents or packing materials. For product registration and
warranty related details, please visit https://www.matrixcomsec.com/product-registration-form.html
Protecting the Phone and Yourself
Power Supply
• Before you connect the phone to its power source, please read the installation instructions, mentioned in
the Quick Installation Guide (QIG).
• The phone can be powered from an AC supply or from the LAN network (PoE).
• If you power the phone from an AC supply, purchase the power adapter from Matrix. The use of any third-
party power adapter may cause damage to the phone. Damages to the phone caused by using other
power adapters are not covered by Matrix warranty.
• Check the voltage of the AC supply. It must be between 100-240 VAC, 47-63Hz.
• The electric plug and socket must be easily accessible to you at all times so that you can disconnect power
from the device, quickly. Remember, the phone does not have a power switch. The only way to disconnect
it is to plug out the power supply.
• The power supply must be placed indoors.
• If you power the phone from the LAN network (Power over Ethernet), ensure that the Ethernet switch to
which the phone is connected supplies power complying with IEEE 802.3af.