Cellular: 2 x Standard SMA female interface, 50 ohm,
WIFI: Standard SMA female interface, 50 ohm,
2 x Standard 3V/1.8V user card interface with 15KV
ESD protection
Standard 3-PIN power jack, reverse-voltage and
overvoltage protection, 2.5mm barrel connector
Restores the router to its original factory default
settings
Minimum current: 450mA (12VDC)
Maximum Current: 600mA (12VDC)
* The product needs to be supplied by a limited
power source or the power supply provided.
Otherwise, safety will not be ensured
Extended Operating Temperature