Note:
When uploading software to the Router, it is important not to interrupt the Web
browser by closing the window, clicking a link, or loading a new page. If the
browser is interrupted, it may corrupt the Router. It should not shutdown the
power supply when uploading. When the upload is complete, your router will
automatically restart and it will revert settings back to the factory defaults. The
upgrade process will take several minutes.
Set Password
The default username and password are both “admin”.
To change the username and password, type the new username, old
password and new password. Once this is done click the “Apply” button.
Logs
Logs allow you to view the router diagnostic information. You have the
option of viewing the log data on the web page, sending the log data
to an external server or sending the data to a serial console.
To Next Page
Loading...
Need help?
General
