Maxon DataMax MA100-1010 User Manual

Page - 23 -
Encryption Method: TKIP, AES or AUTO.
Passphrase: A word or group of 8-63 printable characters
WPA2-PSK, WPA/WPA2-PSK configurations are the same as WPA-PSK.
LAN Settings
Under LAN settings, you can configure the router IP settings, enable or disable
DHCP services on the router.
DHCP services provide your devices with dynamic IP address every time you
connect the device to your router.
IP Address
The gateway IP Address of the router
IP Subnet Mask
The LAN interface subnet mask
MAC Address
The LAN port Ethernet MAC Address
Note: If you change the LAN IP Address, you will need to reboot the
router, making sure that you use the new IP address in your browser to
access the router web settings.
Use Router as DHCP
Server
Enables the router to operate as a DHCP server.
When disabled, the DHCP is turned off.
Starting IP Address
The starting IP Address of the DHCP server’s
Address pool
Ending IP Address
The ending IP Address of the DHCP server’s
Address pool

Maxon DataMax MA100-1010 Specifications

General

Brand	Maxon
Model	DataMax MA100-1010
Category	Network Router
Language	English