16 16023432 Rev. 0 ©2004 Maytag Services
To avoid risk of electrical shock, personal injury or
death; disconnect power to unit before servicing.
Disassembly Procedures
WARNING
!
6. Remove 2 nuts attaching heater element to cover.
Note: There are 2 washers between the heater
element housing and the heater cover.
Console Removal
1. Disconnect power supply to unit.
2. Remove Top Cover.
3. Snip wire ties on the Console wire harness.
CAUTION: Do not cut wire tie without having a
replacement on hand. Never reassemble
dryer without wire ties in place.
To Next Page
Loading...
Need help?
General
