100
Controls in detail
Memory function*
Storing positions in memory
왘 Adjust the seat (컄 page 36) and exteri-
or rear view mirrors (
컄 page 38) to the
desired position.
왘 Push memory button 2.
왘 Release memory button and press one
of the position buttons 1 within three
seconds.
All the settings are stored at the select-
ed position.
Recalling positions from memory
왘 Press and hold one of the position
buttons 1 until seat and rear view mir-
rors have fully moved to the stored po-
sitions.
Exterior rear view mirror parking posi-
tion (passenger side)
For easier parking, you can adjust the pas-
senger exterior rear view mirror so that you
can see the right rear wheel as soon as you
engage reverse gear R.
!
Do not operate the power seats using
the memory button if the seat backrest
is in an excessively reclined position.
Doing so could cause damage to front
or rear seats.
i
Releasing the button immediately
stops movement to the stored posi-
tions.
To Next Page
Loading...
Need help?
General
