102
Controls in detail
Lighting
Lighting
For notes on how to switch on the head-
lamps (
컄 page 46) and use the turn signals
(
컄 page 47), see the “Getting started” sec-
tion.
Combination switch
The combination switch is on the left of the
steering column.
1 High beam
2 High beam flasher
M Off
U Automatic headlamp mode
C Parking lamps, license plate lamps
and instrument panel lamps
Canada only: With the engine run-
ning, the low beam headlamps
additionally switched on.
õ Low beam or high beam headlamps
ƒ Left or right standing lamps (sym-
bol on underside of switch)
Switching on high beams
왘 Turn the switch to õ.
왘 Push the exterior lamp switch forward.
The high beam symbol
A in the
instrument cluster lights up.
High beam flasher
왘 Pull the combination switch briefly in
direction 2.
i
If you remove the key and open the
driver’s door while the parking lamps or
low beam headlamps are switched on,
then a warning sounds.
To Next Page
Loading...
Need help?
General
