249
Practical hints
Replacing bulbs
Replacing bulbs for front lamps
Replacing low beam bulbs
1 Low beam halogen or Bi-Xenon* head-
lamp cover with locking tab
2 Electrical connector
Bi-Xenon* headlamp
Halogen headlamp
왘 Switch off the lights.
왘 Open the hood (컄 page 202).
왘 Push down tab at top end of cover 1
and remove.
왘 Pull electrical connector 2 off.
왘 Unclip the retainer springs and take out
the bulb.
왘 Insert the new bulb so that the base lo-
cates in the recess on the holder.
왘 Clip the retainer springs.
왘 Plug the connector 2 onto the bulb.
왘 Align headlamp cover and click into
place.
Warning! G
Do not remove the cover 1 for the Bi-Xenon
headlamp. Because of high voltage in xenon
lamps, it is dangerous to replace the bulb or
repair the lamp and its components. We rec-
ommend that you have such work done by a
qualified technician.
To Next Page
Loading...
Need help?
General
