212
Operation
Tires and wheels
Rotating wheels
The wheels can be rotated every 3000 to
6000 miles (5000 to 10000 km) or sooner
if necessary, according to the degree of
tire wear. The same direction of tire rota-
tion must be retained.
Rotate the wheels before the characteris-
tic tire wear pattern becomes visible
(shoulder wear on front wheels and tread
center wear on rear wheels).
Thoroughly clean the inner side of the
wheels after each rotation. Check and en-
sure proper tire inflation pressure.
Information on changing a wheel can be
found in the “Practical hints” section
(
컄 page 255).
Warning! G
Rotate front and rear wheels only if they are
of the same size,
Warning! G
Have the tightening torque checked after
changing a wheel. Wheels could become
loose if not tightened with a torque of
110 ft.lb. (150 Nm).
Use only genuine Mercedes-Benz wheel
bolts specified for your vehicle's rims.
To Next Page
Loading...
Need help?
General
