251
Practical hints
Replacing bulbs
왘 Align headlamp cover and click into
place.
Fog lamp bulbs
1 Fog lamp
왘 Switch off the lights.
왘 Use a suitable object (e.g. screwdriver)
to press on the release lever behind the
front panel.
Front fog lamp 1 releases.
왘 Remove fog lamp out of bumper.
2 Bulb socket
3 Tabs
왘 Twist bulb socket 2 counterclockwise
to its end stop and pull out.
왘 Pull bulb out of the bulb socket.
왘 Insert new bulb in socket.
왘 Reinstall bulb socket 2.
왘 Twist bulb socket 2 clockwise to its
end stop.
왘 Reinstall fog lamp into the bumper.
Make sure that tabs 3 firmly seat into
the slots of holder.
Replacing bulbs for rear lamps
Tail lamp assemblies
왘 Switch off the lights.
왘 Open liftgate.
1 Screws
2 Tail, parking and standing lamp
Fog lamp, driver’s side
3 Side marker lamp
4 Turn signal lamp
5 Backup lamp
6 Brake lamp
왘 Remove screws 1.
왘 Remove tail lamp.
컄컄