Preparing the AdBlue
®
refill canister
#
Screw on the fastener of AdBlue
®
refill canis‐
ter 2.
#
Screw disposable hose 1 onto the opening
of AdBlue
®
refill canister 2 until finger-tight.
Topping up AdBlue
®
#
Screw disposable hose 1 onto the filler
neck of the vehicle until finger-tight.
#
Lift up and tip AdBlue
®
refill canister 2.
The filling process stops when the AdBlue
®
tank is completely full.
AdBlue
®
refill canister 2 can be removed
when it has been only partially emptied.
#
Unscrew and close disposable hose 1 and
AdBlue
®
refill canister 2 in reverse order.
#
After topping up the AdBlue
®
tank, switch on
the ignition for at least 60 seconds.
#
Start the vehicle.
The display message in the instrument clus‐
ter goes out.
%
Avoid storing AdBlue
®
refill containers per‐
manently in the vehicle.
Parking
Switching off the vehicle with the start/stop
button
&
WARNING Risk of fire caused by hot
exhaust system parts
Flammable material such as leaves, grass or
twigs may ignite if they come into contact
with hot parts of the exhaust system or
exhaust gas flow.
#
Park the vehicle so that no flammable
material can come into contact with hot
vehicle components.
#
In particular, do not park on dry grass‐
land or harvested grain fields.
154
Driving and parking
To Next Page
Loading...
Need help?
General
