Authorization by entering a passkey (pass-
code):
X
Select the Bluetooth
®
name of the mobile
phone.
The input menu for the passkey is displayed.
X
Choose a one to sixteen-digit number com-
bination as a passkey.
X
Enter the passkey on the multimedia sys-
tem.
X
Press ¬ to confirm.
X
Enter and confirm the passkey on the
mobile phone. Depending on the mobile
phone used, confirm the connection to the
multimedia system and for the PBAP and
MAP Bluetooth
®
profiles. The prompt to
confirm may take up to two minutes to be
displayed (see the manufacturer's operating
instructions).
Connecting a mobile phone (Audio
20)
Requirements
For telephony via the Bluetooth
®
interface, you
require at least one Bluetooth
®
-capable mobile
phone depending on use of one-telephone
mode or two-telephone mode. The mobile
phone must support Hands-Free Profile 1.0 or
above.
In two-telephone mode you can use all the
functions of the multimedia system with the
main telephone. With the additional tele-
phone, you can receive incoming calls.
Multimedia system:
X
Select Vehicle
VehicleQSystem Set‐System Set‐
tingstingsQActivate BluetoothActivate Bluetooth.
X
Activate Bluetooth
®
O.
Mobile phone:
X
Activate Bluetooth
®
and, if necessary, Blue-
tooth
®
visibility for other devices (see the
manufacturer's operating instructions).
The Bluetooth
®
device names for all of one
manufacturer's products might be identical. To
make it possible to clearly identify your mobile
phone, change the device name (see the man-
ufacturer's operating instructions).
If the mobile phone supports the PBAP (Phone
Book Access Profile) and MAP (Message
Access Profile) Bluetooth
®
profiles, the follow-
ing information is transmitted after you con-
nect the main telephone:
R
Phone book
R
Call lists
R
Text messages and e-mail
i
Further information on suitable mobile
phones can be found at: http://
www.mercedes-benz.com/connect
i
In the USA, you can get in touch with the
Mercedes-Benz Customer Assistance Center
on 1-800-FOR-MERCedes
(1-800-367-6372).
In Canada, you can get in touch with the
Customer Relations Center on
1-800-387-0100.
Searching for and authorizing (con-
necting) a mobile phone
Before using your mobile phone with the multi-
media system for the first time, you will need
to search for the phone and then authorize
(connect) it. Depending on the mobile phone,
authorization either takes place by means of
Secure Simple Pairing or by entering a pass-
key. The multimedia system automatically
makes the procedure that is relevant for your
mobile phone available. The mobile phone is
always connected automatically after authori-
zation. Further information on using a mobile
phone with the multimedia system (see the
Digital Operator's Manual).
If the multimedia system does not detect your
mobile phone, this may be due to particular
security settings on your mobile phone (see
the manufacturer's operating instructions).
Searching for a mobile phone
Multimedia system:
X
Select Tel/Tel/®QConn. DeviceConn. DeviceQCon‐Con‐
nect New Devicenect New Device.
X
Select Connect via VehicleConnect via Vehicle.
X
Select mobile phone.
Operating system
247
Multimedia system
Z
To Next Page
Loading...
Need help?
General
