The fuses are located in various fuse boxes:
R
F
use box in the co-driver's footwell
(/ page 239)
R
Fuse box in the seat base of the driver's seat
(/ page 239)
Opening the fuse box in the seat base of the driv-
er's seat
#
To open: pr
ess down and unclip fasteners 1
on the cover.
#
Remove the cover.
#
To close: pr
ess the cover rmly into the seat
base until fasteners 1 clip in.
Opening and closing the fuse box in the co-driver's
f
ootwell
Opening the fuse box
#
Unlocking and removing the stowage compart-
ment co
ver in the co-driver's footwell
(/ page 240).
Example: vehicle tool kit insert
#
Li t
he insert at marked positions 1.
#
Pull the insert out of clips 2.
Closing the fuse box
#
Slide the insert into clips 2.
#
Close the insert by pressing on marked posi-
tions 1.
#
Put on the stowage compartment cover in the
co-dr
iver's footwell and lock it (/ page 240).
Vehicle tool kit
Information on the vehicle tool kit
The vehicle tool kit is located in the stowage com-
par
tment in the footwell on the front passenger
side (/ page 240).
The vehicle tool kit contains:
R
a towing eye
R
a screwdriver with Torx
®
, Phillips and slotted
heads
The vehicle tool kit may also contain the following,
for example:
R
an open-end wrench
R
a wheel wrench
R
a release tool for the park pawl
R
an insert bit
R
a socket wrench
R
a tool for unlocking the lockable DEF ller cap
Breakdown assistance
239
To Next Page
Loading...
Need help?
General
