MAINTENANCE
SECTION 5
CMD-3967823 / 90-865237030 OCTOBER 2003 Page 59
CE469
Changing
Refer to the Maintenance Schedules for the change interval. Engine oil should be changed
before placing the boat in storage.
IMPORTANT: Change engine oil when the engine is warm from operation. Warm oil
flows more freely, carrying away more impurities. Use only recommended engine oil.
Refer to Specifications.
1. Start the engine and allow it to warm up to normal operating temperature.
2. Stop the engine and allow some time for oil to drain into oil pan (approximately 10
minutes).
3. Install the crankcase oil pump. Push the adapter onto the dipstick tube and attach the
pump.
77343
70571
a
b
c
a-Dipstick tube
b-Quicksilver Hose / Oil Pump Adapter (32-863642)
c-Quicksilver Crankcase Oil Pump (802889A1)
4. Pump oil out of crankcase into drain pan.
5. When crankcase is empty, remove the pump and adapter.
6. Install the oil dipstick.
To Next Page
Loading...
Need help?
General