MAINTENANCE
SECTION 5
CMD-3967823 / 90-865237030 OCTOBER 2003 Page 83
3. Apply sealant to threads of new sacrificial anode and install into anode plug. Tighten
securely.
71367
a
b
A
a-Plug
b-Anode
Description
Where Used Part Number
A Loctite 567 PST Pipe Sealant Threads of anode plug 92-809822
INSTALLATION
1. Install new sealing washer.
2. Install anode plug with sacrificial anode.
71368
a
b
a-Sealing washer
b-Anode plug
3. Unplug and connect seawater inlet hose, or open seacock if equipped.
CAUTION
Avoid seawater pump impeller damage. Do not operate the engine without cooling
water being supplied to the seawater pickup pump.
4. Ensure that the seawater pickup pump is supplied cooling water.
5. Start the engine and check for leaks.
CE550
Antifouling Paints
In some areas it may be advisable to paint the bottom of the boat to help prevent marine
growth. Contact your authorized Cummins MerCruiser Diesel dealer / distributor for
recommendations for your boat.
To Next Page
Loading...
Need help?
General