2. Remove crankcase ventilation hose.
a - Crankcase ventilation
hose
b - Filter assembly
c - Clamp screw
3. Wash air filter assembly in warm soapy water.
4. Dry filter assembly with compressed air.
5. Apply 4 Stroke 10W30 Outboard Oil on a rag or towel and lightly pad air
filter element. Wipe off excess oil. The air filter element should be moist to
the touch.
Tube Ref
No.
Description Where Used Part No.
110
4 Stroke 10W30
Outboard Oil
Air filter element 92-858045K01
AIR FILTER INSTALLATION
1. Install crankcase ventilation hose.
2. Install air filter assembly and tighten clamp screw securely.
Air Filter (350, 350 Pro)
The air filter is an integral component of the flywheel guard. It should be
inspected for debris whenever the top cowl is removed. A damp towel is usually
sufficient to remove accumulated particles from the screen.
To Next Page
Loading...
Need help?
General
