Shadow Mode Control with CAN Trackpad Features and
Operation
TRIPLE ENGINE THROTTLE AND SHIFT OPERATION
Movement of the handles on the remote control allows the boat operator to
control the engine throttle speed and gear shift positions of all three engines.
The throttle and shift function is dependant on what engines are running. Refer
to the following table.
Port Engine
Center
Engine
Starboard
Engine
Control Handle Function
Running Running Running
Port engine throttle and shift =
controlled by port control handle
Starboard engine throttle and shift
= controlled by starboard control
handle
Center engine throttle = average of
port and starboard engines
Center engine shift = neutral
unless both engines are in the
same gear
Running Running Off
Port and center engine throttle and
shift = controlled by port control
handle
Off Running Running
Starboard and center engine
throttle and shift = controlled by
starboard control handle
Running Off Running
Port engine throttle and shift =
controlled by port control handle
Starboard engine throttle and shift
= controlled by starboard control
handle
Running Off Off
Port engine throttle and shift =
controlled by port control handle
Off Off Running
Starboard engine throttle and shift
= controlled by starboard control
handle
Off (ignition
key switch
turned on)
Running
Off (ignition
key switch
turned on)
Center engine throttle and shift =
neutral/idle unless both control
handles are in the same gear
FEATURES AND CONTROLS
64 eng
To Next Page
Loading...
Need help?
General
