• The outboard has three gear shift positions to provide operation: forward,
neutral, and reverse.
a - Forward
b - Neutral
c - Reverse
• When shifting, always stop at neutral position and allow the engine speed
to return to idle.
• Advance the control lever to further increase speed.
Stopping the Engine
IMPORTANT: Turning key to the "START" position while the engine is running
will result in engine shut down, while leaving the DTS system active. This will
allow the use of the power trim/tilt from the remote control handle.
Reduce engine speed and shift outboard to neutral position. Turn ignition key to
"OFF" position.
S
T
A
R
T
O
F
F
A
C
C
O
N
S
T
A
R
T
O
F
F
A
C
C
O
N
3482
To Next Page
Loading...
Need help?
General
