Mercury Axius System User Manual

Section 1 - Getting to Know the Axius System
Page 8 CMD-4082082 / 90-8M0052072 eng FEBRUARY 2011
To adjust ERC handle tension:
1. Remove the side cover of the handle needing adjustment.
2. Turn the adjustment screw clockwise to increase tension on the control handle and counter‑clockwise to decrease tension.
3. Adjust to tension desired.
Starboard side cover removed, port similar
a - Detent tension adjustment screw, labeled
"De"
b - Handle tension adjustment screw, labeled
"Fr"
Dual Handle Yacht Console Control—Operation and Adjustment
Operation
Operation of shift and throttle is controlled by the movement of the control handle. Push the control handle forward from neutral
to the first detent for forward gear. Continue pushing the handle forward to increase speed. Pull the control handle back from
neutral to the first detent for reverse gear. Continue pulling the handle back to increase speed.
24559
F
N
R
78
O
78
O
Adjustment
1. Control handle tension adjustment screw ‑ This screw can be adjusted to increase or decrease the tension on the control
handle (cover must be removed). This will help prevent unwanted motion of the handle in rough water. Turn the screw
clockwise to increase tension and counterclockwise to decrease tension. Adjust to tension desired.
28087
a
b

Mercury Axius System Specifications

General

Brand	Mercury
Model	Axius System
Category	Boating Equipment
Language	English